5100-00 Remote Control Valve & Exhaust valve

About the 5100-00 Remote Control Valve & Exhaust valve

5100-00 Remote Control Valve & Exhaust valve is made by combining the Inlet Remote Control Valve 5100 and Exhaust Control Valve 5600.

Our 5100-00 Remote Control Valve & Exhaust valve come without the silencer

The incorporates two valves in one unit, the lower unit is the remote control valve and the upper unit controls the exhaust outlet as air exits the abrasive blast machine.

Compressed air is supplied to the unit at the lower 38mm (1¹/₂“) port ‘air inlet’. The air is then released through the 38mm (1¹/₂“) ‘air outlet’ to the blast machine and blast hose. This is controlled via a pneumatic deadman’s handle which is connected to the 6mm (¹/₂“) inlet and outlet on the side of the valve.

The deadman’s handle is connected to the unit via twinline red/yellow hoses

Closing the deadman’s handle lever activates the two valves simultaneously.

Releasing the deadman’s handle deactivates the 5100-00 immediately.

The abrasive blast machine can also be depressurised by opening the red safety petcock on the 5100-00 valve body. This acts like an emergency stop for the system.