SG400-H2O Power Gun Wet Blaster

About the SG400-H2O Power Gun Wet Blaster

SG400-H2O Power Gun Wet Blaster

Lightweight and compact, wet or dry blast, easy to operate. The SG400-H2O Power Gun Wet Blaster is the ideal wet blast option when a traditional wet blast machine would be too large, inconvenient to set up, or outside a job’s budget.

Whether you are a contractor, do-it-yourselfer, or full-time blast operator, you’ll appreciate the SG400-H2O Power Gun’s lightweight and compact design and that it has nearly the power of a small pressure-blast system, which makes it ideal for wet blasting:

In small or confined spaces.
In elevated work areas.
In difficult to reach places.
On board ships.
With a limited air supply.
In situations that require quick setup and breakdown.

Wet or Dry Blast; Convenient Controls

The water and abrasive controls are located at the operator’s fingertips, and the knob at the back of the gun adjusts blast pressure. These features enable quick and easy switching between wet and dry blast modes, as well as washdown and air blow-off.

Quick Setup

The SG400-H2O Power Gun Wet Blaster sets up in minutes and operates with pressurized water from a water faucet or municipal water supply.

If the job location is farther from the water supply, a garden hose can be attached to the water hose that comes with the gun. After attaching the compressed air and water supplies, partially insert the suction Pick up tube into the abrasive supply, and you are ready to wet blast.

Wet blasting Advantages

The SG400-H2O Power Gun Wet Blaster suppresses dust by mixing a small amount of water with abrasive before the mixture exits the nozzle. This dust suppression:

Reduces cleanup time.
Increases visibility.
Decreases the zone of influence where hazardous dust may circulate.

Common Uses

Use for the following applications

Clean or etch metal.
Clean masonry.
Etch glass or other durable surfaces.
Touch up work.
Do other small or common jobs.