T125-750 7/16″ (11.0mm) Double Venturi Blast nozzle

About the T125-750 7/16″ (11.0mm) Double Venturi Blast nozzle

Our T125-750 7/16″ (11.0mm) Double Venturi Blast nozzle

Offers a major advantage when blasting the like of stainless steel

It has around 35% larger blast pattern than a standard long venturi with only a very slight loss in abrasive velocity.

Double venturi nozzles are used where a wider blasting pattern is needed. Air is drawn through the holes into a low pressure area, expanding the air flow to produce the wider blast pattern.

The Double Venturi Blast Nozzle produces a more even dispersion of abrasive throughout the larger blast pattern.

AIR REQUIREMENT

For this size Blast nozzle here is the size and the air required for best performance 

NO.750 NOZZLE BORE – 7/16″ / 11 mm   LENGTH- 8″ / 200mm

              LOWEST DIRECT AIR  REQUIREMENT-  260 CFM   

THE AIR REQUIREMENT IS TO ACHIEVE 100 psi AT THE NOZZLE

NOZZLE SERVICE LIFE IN HOURS

NOZZLE MATERIAL             STEEL SHOT & GRIT MEDIA          SLAG MEDIA              ALUMINIUM OXIDE
Tungsten Carbide                                       400-800                                 300-400                                    20-40
Silicon Carbide                                            500-900                                 350-600                                    50-100
Silicon Nitride                                             600-1200                               500-1000                                  150-500
Boron Carbide                                             1500-2500                             750-1500                                   200-1000