T125-650 3/8″ (9.5mm) Double Venturi Blast nozzle
£175.50 Exc. VAT £157.95 Exc. VAT
Our T125-650 3/8″ (9.5mm) Double Venturi Blast nozzle
Offers a major advantage when blasting the like of stainless steel
It has around 35% larger blast pattern than a standard long venturi with only a very slight loss in abrasive velocity.
Description
Our T125-650 3/8″ (9.5mm) Double Venturi Blast nozzle
Offers a major advantage when blasting the like of stainless steel
It has around 35% larger blast pattern than a standard long venturi with only a very slight loss in abrasive velocity.
Double venturi nozzles are used where a wider blasting pattern is needed. Air is drawn through the holes into a low pressure area, expanding the air flow to produce the wider blast pattern.
The Double Venturi Blast Nozzle produces a more even dispersion of abrasive throughout the larger blast pattern.
AIR REQUIREMENT
For this size Blast nozzle here is the size and the air required for best performance
NO.650 NOZZLE BORE – 3/8″ / 9.5 mm LENGTH- 7″ / 180mm
LOWEST DIRECT AIR REQUIREMENT- 196 CFM
THE AIR REQUIREMENT IS TO ACHIEVE 100 psi AT THE NOZZLE
Additional information
| Weight | 2 kg |
|---|
