5% OFF

Plastic Blast Media – Type II (P16-20)

£82.50 Exc. VAT £78.38 Exc. VAT

P16-20 Type 2 – Urea Plastic Blast media (Barcol 54 – 65 – 3,5 mohs)

This media was designed for removal of paint and coatings from aluminium and composite materials without damaging these substrates.

Add to wishlist

In Stock

x
Free shipping on orders over £100. (T&Cs Apply) Learn More
Collection available View store location

About the Plastic Blast Media - Type II (P16-20)

Plastic Blast Media – Type II (P16-20)  0.8-1.2mm

P16-20 Type 2 – Urea Plastic Blast media (Barcol 54 – 65 – 3,5 mohs) Per 25KG Bag

This media was designed for removal of paint and coatings from aluminium and composite materials without damaging these substrates.

P16-20 Type 2 – Urea Plastic Blast media is typically the most popular and versatile of the plastic medias. Manufactured from fully-cured recycled amino mouldings.

Our P16-20 Type 2 plastic blast media can be used in wet or dry blasting environments, and is the middle hardness of the thermo-set plastic medias.

Optimum performance, is gained at relatively low pressures – typically 15-40 psi (1-3 bar) – lower than is used for many other blast medias, and hence offers environmentally friendly solutions with regards to recycling of the product and by using very low air pressures.

Plastic Blast Media – Type II (P16-20) is manufactured to high aviation (ROLLS ROYCE CSS227), and military (US MILITARY P-85891A) sieving and hardness specifications and as such can be used in the following industries.

• Military
• Automotive
• Electronics
• Graffiti Removal
• Aerospace
• Tyre & Rubber Applications
• Plastic Moulding
• Public Transport
• Civil & Marine EngineeringMarine
• Marine

Applications

This media was designed for removal of paint and coatings from aluminium and composite materials without damaging these substrates. There is a vast array of other applications that can use this material and in the hands of a skilled operator large time and cost savings can be achieved against chemical and other forms of stripping. This is our commercially manufactured product made to the same standards as military product but without full first article inspection reports.

The material allows the controlled removal of surface coatings, paint , dirt, flash and burr from a variety of substrates, without damaging or peening the substrate, and at the correct pressures and conditions can achieve as much as a 6-12 x recycle usage of the plastic media. This is due to the random ‘blocky/angular’ shape of the particle, and its thermoset qualities which will not shatter on impact and will rather ware down.

Additional Information

Weight 25 kg