Power Injection Suction Gun (PIG) SG400

About the Power Injection Suction Gun (PIG) SG400

Power Injection Suction Gun (PIG) SG400.

Power Injection Suction Gun (PIG) SG400 simply connects to compressed-air and abrasive sources.

The unique suction lance installed on the abrasive hose is partially submerged into a bag of media.

Blasting begins when the operator depresses a lever on the gun. The tool operates on the principle of induction, where vacuum is created by the compressed air rushing past the point where the abrasive hose attaches to the gun.

The vacuum draws abrasive through the hose into the gun, where it mixes with compressed air. The air-abrasive mix exits the gun and strikes the surface to be blasted

• The Power Injection Suction Gun (PIG) SG400 is a suction blast tool designed for dry abrasive blasting where the air supply is limited or the job is small.
• The tool is lightweight and compact and ideal where setting up a conventional pressure blast machine would be awkward or inconvenient.
• The Power Gun can be used with all common media to clean or etch metal, clean masonry, etch glass, and other durable surfaces.
• The optional heavy-duty plastic hopper holds and ample supply of media. The amount of media loaded will be dictated by the application and the location of the blast job

– Lightweight, portable and easily transportable tool
– Suitable for use with all media containers, or even straight out of the bag
– Simple work principle – just plunge the suction lance into the container of abrasive and pull the trigger
– Easy to use and maintain

AIR REQUIREMENTS:

Working Pressure       Guide Air Consumption

3 bar / 45 psi                85 cfm / 2.4 m3/min

5 bar / 75 psi                127 cfm / 3.6 m3/min

7 bar / 100 psi              170 cfm / 4.8 m3/min